You can learn more about the cookies we use as well as how you can change your cookie settings by clicking here.By continuing to use this site without changing your settings, you are agreeing to our use of cookies.All other trademarks are the property of their respective owners.Zebra Technologies Corp.
Once Complete be sure to right click on the Printer again and choose Printer Properties - choose to Print a Test Page. NOTE - If you are using the Zebra LP2844 or LP2824 printer, please see the following article here. Upon plugging the Zebra printer in, the computer may prompt you to download and install its own driver. If this driver is the GC420d (EPL) driver, you MUST change this driver to the GC420d driver (name should not include EPL). To change the driver to the GC420d: Go to the printer on your Computer - DevicesPrinters. Zebra Gc420D Driver Find TheIn the Drop down for Driver find the GC420d (without the EPL) If it is not listed, choose New Driver. Select the ZDesigner GC420d driver Choose OK. The following setting must be changed in the Design Manager software if you are printing labels using the Zebra printer. The Use Label Printer box must be checked if you are printing labels to the Zebra printer. The following setting must be changed in the Design Manager software if you are printing receipts using the Zebra printer. The Use Receipt Printer box must be checked if you are printing receipts to the Zebra printer. Printer Configuration: Please see below for the proper settings needed to print Receipts or Labels. These settings can be changed in the Start menu of your Windows operating system by selecting Printers and Devices. Some versions of Windows do not have a default paper size and therefore the Setup button will need to be used every time labels are printed. If the computer that is used to print the labels is also used for other printing then make sure that the correct printer is selected the next time you print a non-label document. Receipt Printing configuration Inside your computer, not Design Manager, Go to the Printer (Devices and Printers). Right click on the Printer and Choose Printer Preferences - Options tab. Use the following settings for Receipt paper: Set Speed to 2 (or 3) Set Paper Size to Width 4.00 x Height 4.00 Set Paper Format to Inch and Portrait Be sure that the rotate180 degrees box is checked as well 4. Go to the Advanced Setup tab Set Operation Mode to Tear Off Set Media Type Thermal Direct Set Tracking Mode to Continuous Click OK. Once complete, be sure to right click on the Printer again and choose Printer Properties - choose to Print a Test Page. NOTE: If the receipt is printing off center (leftright) make the following change: Go back to the Printing Preferences - Options tab. Under the Unprintable Area, change Left: to 0.25. After making these changes, Click OK. After the test is complete, go back into Design Manager and print another receipt. If still off center, make further changes and tests to the unprintable area settings until it centers. Label Printing configuration Inside your computer, not Design Manager, Go to the Printer (Devices and Printers). Use the following settings for printing Labels: Set Speed to 2 (or 3) Set Paper Size to Width 2.25 x Height 2.00 Set Paper Format to Inch and Portrait 4. Go to the Advanced Setup tab Select the box for Use Printer Settings at the top left Click OK.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |